top of page

S-6ES COYOTE II

Back to Aircraft

PRINTABLE FORMS

SPECS & PERFORMANCE

​

PRE-FLIGHT INSPECTION

ENGINE

Rotax 912UL (80 hp) and 912ULS (100 hp) available factory new.

Due to currency fluctuation, prices are updated frequently. Please call (785) 625-6346 for current pricing.

HIGHLIGHTED FEATURES

Welded 4130 Cockpit cage powder coated cockpit cage

  • Aluminum tube tail cone assembles from pre-drilled parts

  • Most parts powder coated or anodized

  • Cabin skylight

  • Differential Ailerons, operated by cables and push-pull tubes

  • Dual elevator horns, push- pull tube operated elevator

  • Ball bearing aircraft control pulleys, all cables pre-assembled

  • Pre-drilled aluminum struts with adjustable aft lift strut

  • 3” Main wing spar 2” Trailing wing spar

  • Pitot/static system

  • Stamped aluminum ribs

  • Sheet aluminum leading edge wrap

  • Root rib tension system on wings, ailerons and flaps

  • Molded wing tips

  • 9 Gallon fuel tank in each wing w/ visual fuel quantity indicators

  • Folding tail & wings, standard 2 people, 45 minutes, optional 1 person, 15 minutes

  • Aluminum tail ribs

  • Double cable braced tail

  • Aluminum framed LEXAN curved doors with gas door lift cylinders

  • Dual air vents

  • Dual control sticks

  • Dual rudder pedals

  • Super 6 Instrument Panel

  • Single panel mount throttle

  • Panel mounted elevator trim 

  • Center flap handle

  • Single hydraulic toe brakes

  • Aluminum wheels/Aircraft grade tires

  • Park Brake

  • Tapered spring steel main gear

  • Telescoping steerable nose gear (Trike) 

  • Full swivel 8" steerable tail wheel (Tail Wheel)

  • Upholstered seats with map pockets, adjust fore and aft, 4 positions

  • Lap and shoulder belts

  • In-cockpit fuel sump drain

  • Pre-cut floorboard w/ aluminum wear plate

  • 4 Oz. DACRON pre-sewn skin in choice of colors

  • Placards and decals

  • Cleco pliers and starter clecos

BUILD TIME: 350-550 HOURS
QUICK BUILD TIME: 150-250 HOURS
QUICK BUILD OPTIONS, USING ORATEC 6000

Color options:  White, Cub Yellow, Corsair Blue, Red, Silver   

The S-6ES Quick Build Option includes:

Wings assembled; covered, wires for AVEO LED Strobes installed, fuel system installed with fuel lines plumbed and ready to integrate into fuselage.

  

  • Floorboard, wear plate, rudder pedal location drilled, and nut plates installed.

  • Com antenna mount installed in fuselage belly.

  • Gear legs aligned and drilled.

  • Optional aft baggage assembled and door fitted.

  • Flaps, ailerons and tail group assembled and covered.

Quick Build available with 2 or 3 color trim options

KITS AND OPTIONS
ENGINE INSTALL KIT EQUIPMENT

  • Low drag 2-piece fiberglass cowling, with 1/4 turn fasteners

  • oil check door

  • 12” Spinner

  • 4-Point rubber isolated engine mount

  • Stainless steel exhaust system (912UL/912ULS)

  • Cooling system

  • Hardware

  • Pre-assembled oil lines with fire sleeves, fuel lines and fittings

  • ACS ignition switch

  • Pre- fabricated battery, starter and ground cables

  • Does not include: Engine, Prop, or Prop installation hardware

PROP CHOICES

  • 2-blade Warp Drive ground adjustable w/ HP-L hub (912 UL)

  • 3-blade Warp Drive ground adjustable w/ HP-L hub (912 ULS)

 

BRAKE/TIRE OPTIONS

The S-6ES comes standard with 6” aircraft grade tires and single hydraulic toe brakes.  The following upgrades are available.

 

  • Trike gear up-sized mains and nose wheel  (Includes and requires slightly larger fork)

  • Both side hydraulic brakes
     

INTERIOR OPTIONS

  • Thermal Formed Plastic Interior (Includes behind the seat baggage compartment) available in Grey. 

  • Behind the seat Cargo Area (Bolt in Style) (does not require Thermal Formed Interior)

  • Aft Baggage Compartment

  • Tinted Glass (doors only)

  • Map box (not an aftermarket option)

  • Heater - Muffler style for 912UL/ULS

  • Heater - Radiant style


​UPHOLSTERY OPTIONS

  • Stock upholstery is gray fabric, with black piping.

  • Headrests

​

OTHER OPTIONS

  • Gascolator

  • Support for folding wing option

  • Yaw Stabilizer Kit (Recommended for floats)

  • Main Gear Leg Fairings

  • Nose Gear Leg Fairing

  • Radio Mount Plates

  • Antenna Mount Plate

  • Windshield Cover

  • AVEO Strobes

  • Carbon Fiber Cowling

  • Pre-built Tailcone:  Built and attached to cockpit cage

bottom of page